Email your questions to:
PZGunsmith@KIH.Net
PZGunsmith@KIH.Net
 | |  | |  | |  | |  | |  | |  |
Check out the Glock Pistol
Conversions. We have
these in stock for
immediate delivery. Give
us a call and we can get
one out to you. They work
great.
If we can get you anything
else just call us, we have
the parts you need to make
that custom gun that you
always wanted.
Remember:
"Life's Too Short
To Shoot An Ugly Gun."
Call:
859-556-1864
OR
859-234-4144
From 9:00 - 5:00
Kentucky Time
Closed on Sun & Tues
Thanks,
Paul & Thelma
1110 Dixon Road
Sadieville, Kentucky
40370
Conversions. We have
these in stock for
immediate delivery. Give
us a call and we can get
one out to you. They work
great.
If we can get you anything
else just call us, we have
the parts you need to make
that custom gun that you
always wanted.
Remember:
"Life's Too Short
To Shoot An Ugly Gun."
Call:
859-556-1864
OR
859-234-4144
From 9:00 - 5:00
Kentucky Time
Closed on Sun & Tues
Thanks,
Paul & Thelma
1110 Dixon Road
Sadieville, Kentucky
40370
|
Ky Guns
| Customising a Rifle Or Pistol is one of the most satisfying projects that you can do. Accuracy, Good Looks, and Versatility are the reasons people redo the factory gun to a personal gun. |
| Go ahead, select from the parts we offer here and make for yourself "Your Custom Rifle or Custom Pistol" |
| Click for |
We offer the light weight and accurate Aluminum Pistol Barrels by
Tactical Solutions for the Ruger Pistols. These are the same barrels that
you have been reading about and seen on shows. They will fit all Ruger
Semi Auto 22's to include the Mk III, Mk II, Mk I and the Ruger 22/45.
All of these pistols have the same upper and bolt assembly. The only
difference is that there is no Loaded Shell Indicator as there is on the
New MK III. Complete instructions are sent with each Upper making it
easy to disassembled and reassemble by the average shooter.
Tactical Solutions for the Ruger Pistols. These are the same barrels that
you have been reading about and seen on shows. They will fit all Ruger
Semi Auto 22's to include the Mk III, Mk II, Mk I and the Ruger 22/45.
All of these pistols have the same upper and bolt assembly. The only
difference is that there is no Loaded Shell Indicator as there is on the
New MK III. Complete instructions are sent with each Upper making it
easy to disassembled and reassemble by the average shooter.
Custom Rifles
Not everyone has the time to build their own custom rifle or pistol. So
we offer the following service. We will build the Rifle or Pistol to meet
your needs either on your action or on one of ours. You buy the parts and
we can assemble them for you.
It's your choice, just let us know what you are looking for. As time
permits, we will be working on this page to show custom Rifles that will
be available. Please be patient as I try to develop this page.
we offer the following service. We will build the Rifle or Pistol to meet
your needs either on your action or on one of ours. You buy the parts and
we can assemble them for you.
It's your choice, just let us know what you are looking for. As time
permits, we will be working on this page to show custom Rifles that will
be available. Please be patient as I try to develop this page.
Its the extras that make you Pistol or Rifle custom to you. Whether you
want a custom Scope Base, Scope Mounts, Trigger or whatever, we are
trying to have the parts you need here at our sight. Check our selection
and make your firearm you own. Again, I am developing this page, so
there may be quite a few things lacking until it is complete.
want a custom Scope Base, Scope Mounts, Trigger or whatever, we are
trying to have the parts you need here at our sight. Check our selection
and make your firearm you own. Again, I am developing this page, so
there may be quite a few things lacking until it is complete.
A truly customised rifle starts with a custom stock, and that is what we
have to offer. Fully inletted and finished stocks by Predator Gunstocks
and Boyd Stocks that fit your receiver with no modifications required.
Just remove the stock screw from in front of the trigger guard, remove
the old stock and replace it with your new customised, fully finished
stock. Choose from various colors to match your barrel and/or your
personality. Stocks are cut to fit the average adult and are already
inletted to fit the .920 inch Bull Barrel.
have to offer. Fully inletted and finished stocks by Predator Gunstocks
and Boyd Stocks that fit your receiver with no modifications required.
Just remove the stock screw from in front of the trigger guard, remove
the old stock and replace it with your new customised, fully finished
stock. Choose from various colors to match your barrel and/or your
personality. Stocks are cut to fit the average adult and are already
inletted to fit the .920 inch Bull Barrel.
We offer Aluminum Barrels by Tactical Solutions, and also carry a
limited supply of Green Mountain Barrels. These barrels are .920 inch
diameter and fit most bull barrel stocks. If you can remove two screws,
you can replace your own barrel safely and accurately. The semi auto
Ruger has a built in headspace which eliminates the need for
Gunsmithing. Just install and shoot, it's that easy. Check the different
colors of these barrels, and match them up to the stock of your choice.
You'll have a rifle that is uniquely your own, that you'll be proud to
shoot, and one that is light weight, fun to shoot, and accurate to boot.
limited supply of Green Mountain Barrels. These barrels are .920 inch
diameter and fit most bull barrel stocks. If you can remove two screws,
you can replace your own barrel safely and accurately. The semi auto
Ruger has a built in headspace which eliminates the need for
Gunsmithing. Just install and shoot, it's that easy. Check the different
colors of these barrels, and match them up to the stock of your choice.
You'll have a rifle that is uniquely your own, that you'll be proud to
shoot, and one that is light weight, fun to shoot, and accurate to boot.
 | |  | |  | |  |
| Welcome |
| Supplies are low for more 10/22 Barrels by Tactical Solutions Check out Mizzou Mule at MizzouMuleGuns.com |
Tactical Solutions is known for the manufacture of Match Grade Fluted Bull Barrels
to be used as replacements for the Ruger 10/22 Rifle. We have on hand a number
of these Barrels in Purple. This is a very distinctive color, the color of Royalty, and
makes a very impressive Rifle. The color goes well with a Black Receiver and
either a Natural Wood Colored Stock or a Black Stock. I believe Boyd's Gunstocks
also makes a Purple and Black Stock for this barrel. It really looks good in the
Hogue Black Overmolded Stock which makes for a lightweight Rifle that is easy to
carry and shoot and is ideally suited for shooting by youngsters and women where
the ease of handling will add to their enjoyment as well as yours.
All Barrels are chambered on center to insure perfect bullet to bore alignment for
the best in rifle accuracy. These barrels are 16 1/2" long and come with a 1 in 16
twist rifling. Barrels are made .920" diameter to fit most custom bull barrel stocks
and are fluted to add to the distinctive appearance of a custom barreled rifle. They
are easily replaced requiring the removal of two screws beneath the factory barrel.
Barrels have been tested for accuracy and durability and should give any shooter
many years of enjoyable service.
To Order Call 859-234-4144 or 859-556-1864 from 9:00 am to 5:00 pm EST.
to be used as replacements for the Ruger 10/22 Rifle. We have on hand a number
of these Barrels in Purple. This is a very distinctive color, the color of Royalty, and
makes a very impressive Rifle. The color goes well with a Black Receiver and
either a Natural Wood Colored Stock or a Black Stock. I believe Boyd's Gunstocks
also makes a Purple and Black Stock for this barrel. It really looks good in the
Hogue Black Overmolded Stock which makes for a lightweight Rifle that is easy to
carry and shoot and is ideally suited for shooting by youngsters and women where
the ease of handling will add to their enjoyment as well as yours.
All Barrels are chambered on center to insure perfect bullet to bore alignment for
the best in rifle accuracy. These barrels are 16 1/2" long and come with a 1 in 16
twist rifling. Barrels are made .920" diameter to fit most custom bull barrel stocks
and are fluted to add to the distinctive appearance of a custom barreled rifle. They
are easily replaced requiring the removal of two screws beneath the factory barrel.
Barrels have been tested for accuracy and durability and should give any shooter
many years of enjoyable service.
To Order Call 859-234-4144 or 859-556-1864 from 9:00 am to 5:00 pm EST.